Items where Subject is "Forestry machinery and engineering"

Article

Brischke, C., Alfredsen, G., Humar, M., Conti, E., Cookson, L., Emmerich, L., Flæte, P. O., Fortino, S., Francis, L. P., Hundhausen, U., Irbe, I., Jacobs, K., Klamer, M., Kržišnik, D., Lesar, B., Melcher, E., Meyer-Veltrup, L., Morrell, J. J., Norton, J., Palanti, S., Presley, G., Reinprecht, L., Singh, T., Stirling, R., Venäläinen, M., Westin, M., Wong, A. H. H. and Suttie, E. (2021) Modeling the Material Resistance of Wood—Part 2: Validation and Optimization of the Meyer-Veltrup Model. Forests, 12 (5). p. 576. ISSN 1999-4907

Brischke, C., Alfredsen, G., Humar, M., Conti, E., Cookson, L., Emmerich, L., Flæte, P. O., Fortino, S., Francis, L. P., Hundhausen, U., Irbe, I., Jacobs, K., Klamer, M., Kržišnik, D., Lesar, B., Melcher, E., Meyer-Veltrup, L., Morrell, J. J., Norton, J., Palanti, S., Presley, G., Reinprecht, L., Singh, T., Stirling, R., Venäläinen, M., Westin, M., Wong, A. H. H. and Suttie, E. (2021) Modelling the Material Resistance of Wood—Part 3: Relative Resistance in above- and in-Ground Situations—Results of a Global Survey. Forests, 12 (5). p. 590. ISSN 1999-4907

Darzi, S., Karampour, H., Bailleres, H., Gilbert, B. P. and Fernando, D. (2020) Load bearing sandwich timber walls with plywood faces and bamboo core. Structures, 27 . pp. 2437-2450. ISSN 2352-0124

Dickinson, G. R. and Huth, J. R. (2003) Susceptibility of Corymbia citriodora subsp. variegata, eucalyptus cloeziana and E. grandis to the cut-stump application of glyphosate following pre-commercial thinning operations in North-Eastern Australia. Journal of Tropical Forest Science, 15 (3). pp. 505-509. ISSN 01281283 (ISSN)

Faircloth, A., Brancheriau, L., Karampour, H. and Kumar, C. (2023) Evaluation of full-sized and thick cross-laminated timber using in-line non-destructive techniques. Wood Material Science & Engineering . pp. 1-14. ISSN 1748-0272

Faircloth, A., Brancheriau, L., Karampour, H., So, S., Bailleres, H. and Kumar, C. (2021) Experimental Modal Analysis of Appropriate Boundary Conditions for the Evaluation of Cross-Laminated Timber Panels for an In-Line Approach. Forest Products Journal, 71 (2). pp. 161-170. ISSN 0015-7473

Faircloth, A., Gilbert, B. P., Kumar, C., Leggate, W. and McGavin, R. L. (2024) Understanding the Adhesion Performance of Glued Laminated Timber Manufactured with Australian Softwood and High-Density Hardwood Species. Research Square .

Faircloth, A., Gilbert, B. P., Kumar, C., Leggate, W. and McGavin, R. L. (2024) Understanding the adhesion performance of glued laminated timber manufactured with Australian softwood and high-density hardwood species. European Journal of Wood and Wood Products . ISSN 1436-736X

Faircloth, A., Kumar, C., McGavin, R. L., Gilbert, B. P. and Leggate, W. (2023) Mechanical Performance and Bond Integrity of Finger Jointed High-Density Sub-Tropical Hardwoods for Residential Decking. Forests, 14 (5). p. 956. ISSN 1999-4907

Gardner, R. A. W. and Lee, D. J. (2021) Investigating the wood production and adaptability potential of Corymbia hybrid progeny in northern coastal Zululand, South Africa. Southern Forests: a Journal of Forest Science, 83 (2). pp. 1-9. ISSN 2070-2620

Gattas, J. M., Reid, C., Dakin, T., Shanks, J. and McGavin, R. L. (2024) Board assignment heuristics for nail laminated out-of-grade timber. Australian Journal of Civil Engineering . pp. 1-14. ISSN 1448-8353

Gendvilas, V., Lee, D. J., Kain, D. P., Kumar, C., Downes, G. M., Lausberg, M. and Harrington, J. J. (2024) Predicting Wood Density Using Resistance Drilling: The Effect of Instrument and Operator. Forests, 15 (1). p. 157. ISSN 1999-4907

Gilbert, B. P., Underhill, I. D., Bailleres, H., El Hanandeh, A. and McGavin, R. L. (2014) Veneer based composite hollow utility poles manufactured from hardwood plantation thinned trees. Construction and Building Materials, 66 . pp. 458-466. ISSN 0950-0618

Gilbert, B. P., Bailleres, H., Fischer Maxime, F., Zhang, H. and McGavin, R. L. (2017) Mechanical Properties of Rotary Veneers Recovered from Early to Midrotation Subtropical-Hardwood Plantation Logs for Veneer-Based Composite Applications. Journal of Materials in Civil Engineering, 29 (10). 04017194.

Gilbert, B. P., Bailleres, H., Zhang, H. and McGavin, R. L. (2017) Strength modelling of Laminated Veneer Lumber (LVL) beams. Construction and Building Materials, 149 . pp. 763-777. ISSN 0950-0618

Gilbert, B. P., Davies, T. E., McGavin, R. L. and Dowse, C. J. (2024) Towards reducing the capital cost of manufacturing Laminated Veneer Lumbers: Investigating finger jointing solutions. Construction and Building Materials, 411 . p. 134158. ISSN 0950-0618

Gilbert, B. P., Underhill, I. D., Fernando, D. and Bailleres, H. (2017) Structural solutions to produce long timber Veneer Based Composite hollow sections. Construction and Building Materials, 139 . pp. 81-92. ISSN 0950-0618

Gilbert, B. P., Zhang, H. and Bailleres, H. (2019) Reliability of laminated veneer lumber (LVL) beams manufactured from early to mid-rotation subtropical hardwood plantation logs. Structural Safety, 78 . pp. 88-99. ISSN 0167-4730

Grant, P., Psaltis, S., Shirmohammadi, M. and Turner, I. (2023) Constructing Virtual Representations of Laminated Timber Products. Research Square , Preprint.

Grant, P., Psaltis, S., Shirmohammadi, M. and Turner, I. (2024) Image-based mesh generation for constructing a virtual representation of engineered wood product samples. European Journal of Wood and Wood Products . ISSN 1436-736X

Hien Mai, T. and Redman, A. (2018) Characterisation of acacia and eucalyptus plantation wood for veneer production in vietnam. Journal of Forestry Science and Technology, 5 . pp. 127-135.

Jiao, S., Gunalan, S., Gilbert, B. P., Baleshan, B. and Bailleres, H. (2021) Experimental Investigation of an Innovative Composite Mullion Made of Aluminium and Timber. Journal of Building Engineering, 38 . p. 101907. ISSN 2352-7102

Karampour, H., Piran, F., Faircloth, A., Talebian, N. and Miller, D. (2023) Vibration of Timber and Hybrid Floors: A Review of Methods of Measurement, Analysis, and Design. Buildings, 13 (7). p. 1756. ISSN 2075-5309

Karkoodi, S., Karampour, H., Lyu, C., Gilbert, B. P., McGavin, R. L., Gunalan, S. and Ghanbari-Ghazijahani, T. (2023) An investigation of a novel wood fibre-filled steel tubular (FFST) systems for construction. Construction and Building Materials, 401 . p. 132939. ISSN 0950-0618

Kirker, G. T., Hassan, B., Mankowski, M. E. and Eller, F. J. (2024) Critical Review on the Use of Extractives of Naturally Durable Woods as Natural Wood Protectants. Insects, 15 (1). p. 69. ISSN 2075-4450

Kumar, C. (2021) Investigation of an innovative preservative treatment of green timber using compression. Wood Material Science & Engineering . pp. 1-8. ISSN 1748-0272

Kumar, C., Faircloth, A., Leggate, W. and Redman, A. (2021) Impact of Continuous Drying Method on Drying Quality of Southern Pine Sawn Timber. BioResources, 17 (1). p. 18. ISSN 1930-2126

Kumar, C., Faircloth, A., Shanks, J., McGavin, R. L., Li, X., Ashraf, M. and Subhani, M. (2023) Investigating Factors Influencing Rolling Shear Performance of Australian CLT Feedstock. Forests, 14 (4). p. 711. ISSN 1999-4907

Kumar, C., Hassan, B. and Fitzgerald, C. J. (2024) Investigation of heat transfer in timber boards and a simulated wall section to eliminate colonies of the west Indian drywood termite, (Blattodea: Kalotermitidae). Austral Entomology, n/a (n/a). ISSN 2052-174X

Kumar, C. and Leggate, W. (2022) An overview of bio-adhesives for engineered wood products. International Journal of Adhesion and Adhesives, 118 . p. 103187. ISSN 0143-7496

Kumar, C., Li, X., Subhani, M., Shanks, J., Dakin, T., McGavin, R. L. and Ashraf, M. (2022) A review of factors influencing rolling shear in CLT and test methodology. Journal of Testing and Evaluation, 50 (2).

Kumar, C., Redman, A., Leggate, W., McGavin, R. L. and Dakin, T. (2021) Assessment of the Application of a SMART THUMPER™ as a Low-cost and Portable Device Used for Stiffness Estimation of Timber Products. BioResources, 16 (3). ISSN 1930-2126

Leggate, W., Kumar, C., McGavin, R. L., Faircloth, A. and Knackstedt, M. (2020) The Effects of Drying Method on the Wood Permeability, Wettability, Treatability, and Gluability of Southern Pine from Australia. Bioresources, 16 . pp. 698-720.

Leggate, W., McGavin, R. L. and Lewis, T. (2019) An Assessment of Native Forests in Queensland for the Potential Supply of Small-diameter, Peeler Logs for Spindleless Lathe Rotary-veneer Processing. BioResources, 14 (4). p. 15. ISSN 1930-2126

Leggate, W., McGavin, R. L., Miao, C., Outhwaite, A., Chandra, K. A., Dorries, J. W., Kumar, C. and Knackstedt, M. (2020) The Influence of Mechanical Surface Preparation Methods on Southern Pine and Spotted Gum Wood Properties: Wettability and Permeability. BioResources, 15 (4). pp. 8554-8576. ISSN 1930-2126

Leggate, W., McGavin, R. L., Outhwaite, A., Dorries, J. W., Robinson, R. J., Kumar, C., Faircloth, A. and Knackstedt, M. (2021) The Influence of Mechanical Surface Preparation Method, Adhesive Type, and Curing Temperature on the Bonding of Darwin Stringybark. BioResources, 16 (1). p. 22. ISSN 1930-2126

Leggate, W., McGavin, R. L., Outhwaite, A., Gilbert, B. P. and Gunalan, S. (2022) Barriers to the Effective Adhesion of High-Density Hardwood Timbers for Glue-Laminated Beams in Australia. Forests, 13 (7). p. 1038. ISSN 1999-4907

Leggate, W., McGavin, R. L., Outhwaite, A., Kumar, C., Faircloth, A. and Knackstedt, M. (2021) Influence of Mechanical Surface Preparation Methods on the Bonding of Southern Pine and Spotted Gum: Tensile Shear Strength of Lap Joints. BioResources, 16 (1). p. 16. ISSN 1930-2126

Leggate, W., Outhwaite, A., McGavin, R. L., Gilbert, B. P. and Gunalan, S. (2022) The Effects of the Addition of Surfactants and the Machining Method on the Adhesive Bond Quality of Spotted Gum Glue-laminated Beams. BioResources, 17 (2). pp. 3413-3434. ISSN 1930-2126

Leggate, W., Shirmohammadi, M., McGavin, R. L., Chandra, K. A., Knackstedt, M., Knuefing, L. and Turner, M. (2020) Influence of Wood’s Anatomical and Resin Traits on the Radial Permeability of the Hybrid Pine (Pinus elliottii× Pinus caribaea) Wood in Australia. BioResources, 15 (3). pp. 6851-6873. ISSN 1930-2126

Leggate, W., Shirmohammadi, M., McGavin, R. L., Outhwaite, A., Knackstedt, M. and Brookhouse, M. (2021) Examination of wood adhesive bonds via MicroCT: The influence of pre-gluing surface machining treatments for southern pine, spotted gum, and Darwin stringybark timbers. BioResources, 16 (3). pp. 5058-5082. ISSN 1930-2126

Lu, P., Gilbert, B. P., Kumar, C., McGavin, R. L. and Karampour, H. (2024) Comprehensive analysis of glulam delamination through finite element modelling considering heat and mass transfer, plasticity and fracture mechanics: a case study using high density hardwood. European Journal of Wood and Wood Products . ISSN 1436-736X

Lu, P., Gilbert, B. P., Kumar, C., McGavin, R. L. and Karampour, H. (2023) Influence of the moisture content on the fracture energy and tensile strength of hardwood spotted gum sawn timber and adhesive bonds (gluelines). European Journal of Wood and Wood Products, 82 (1). pp. 53-68. ISSN 1436-736X

Mainey, A., Gilbert, B. P., Redman, A., Gunalan, S. and Bailleres, H. (2021) Time dependent moisture driven backout of nailplates: experimental investigations and numerical predictions. European Journal of Wood and Wood Products, 79 (6). pp. 1589-1605. ISSN 1436-736X

Manh, H. T., Redman, A., Van, C. P. and Ngoc, B. D. (2022) Mass transfer properties of Acacia mangium plantation wood. Maderas: Ciencia y Tecnologia, 24 .

McGavin, R. L. and Dakin, T. (2020) Mass-timber Construction in Australia: Is CLT the only answer? Bioresources, 15 (3). pp. 4642-4645.

McGavin, R. L., McGrath, J., Fitzgerald, C. J., Kumar, C., Oliver, C. and Lindsay, A. (2021) Sawn Timber and Rotary Veneer Processing and Grade Recovery Investigation of Northern Australian Plantation Grown African Mahogany. BioResources, 16 (1). p. 23. ISSN 1930-2126

McGavin, R. L., Nguyen, H. H., Gilbert, B. P., Dakin, T. and Faircloth, A. (2019) A Comparative Study on the Mechanical Properties of Laminated Veneer Lumber (LVL) Produced from Blending Various Wood Veneers. BioResources, 14 (4). pp. 9064-9081. ISSN 1930-2126

Miao, C., Fernando, D., Heitzmann, M. T. and Bailleres, H. (2019) GFRP-To-Timber Bonded Joints: Adhesive Selection. International Journal of Adhesion and Adhesives, 94 . pp. 29-39. ISSN 0143-7496

Nguyen, H. H., Gilbert, B. P., McGavin, R. L. and Bailleres, H. (2019) Optimisation of cross-banded laminated veneer lumbers manufactured from blending hardwood and softwood veneers. European Journal of Wood and Wood Products, 77 (5). pp. 783-797. ISSN 1436-736X

Nguyen, H. H., McGavin, R. L., Gilbert, B. P. and Bailleres, H. (2019) Key Mechanical Properties of Cross-banded Laminated Veneer Lumbers Manufactured from Blending Spotted Gum and Hoop Pine Veneers. BioResources, 14 (4). p. 15. ISSN 1930-2126

Nguyen, T. T., Redman, A., Leggate, W., Vandi, L.-j., Bailleres, H. and Heitzmann, M. (2021) Processing Parameters Optimization of Cotton Stalk (Gossypium hirsutum L.) Particleboards with Emulsifiable Polymeric Isocyanate Adhesive. BioResources, 16 (2). ISSN 1930-2126

Psaltis, S., Kumar, C., Turner, I., Carr, E. J., Farrell, T., Brancheriau, L., Bailléres, H. and Lee, D. J. (2021) A new approach for predicting board MOE from increment cores. Annals of Forest Science, 78 (3). p. 78. ISSN 1297-966X

Redman, A., Bailleres, H., Gilbert, B. P., Carr, E. J., Turner, I. W. and Perré, P. (2017) Finite element analysis of stress-related degrade during drying of Corymbia citriodora and Eucalyptus obliqua. Wood Science and Technology . pp. 1-23. ISSN 1432-5225

Redman, A., Bailleres, H., Gilbert, B. P., Carr, E. J., Turner, I. W. and Perré, P. (2018) Finite element analysis of stress-related degrade during drying of Corymbia citriodora and Eucalyptus obliqua. Wood Science and Technology, 52 (1). pp. 67-89. ISSN 1432-5225

Redman, A., Bailleres, H. and Perré, P. (2011) Characterization of viscoelastic, shrinkage and transverse anatomy properties of four Australian hardwood species. Wood Material Science & Engineering, 6 (3). pp. 95-104. ISSN 1748-0272

Redman, A., Bailleres, H., Perré, P., Carr, E. and Turner, I. (2017) A relevant and robust vacuum-drying model applied to hardwoods. Wood Science and Technology, 51 (4). pp. 701-719. ISSN 1432-5225

Sandino, J., Pegg, G. S., Gonzalez, F. and Smith, G. (2018) Aerial Mapping of Forests Affected by Pathogens Using UAVs, Hyperspectral Sensors, and Artificial Intelligence. Sensors, 18 (4). p. 944. ISSN 1424-8220

Shirmohammadi, M. (2022) Investigating Antimicrobial Characteristics/Advantages of Australian Wood Species for Use in Food Packaging - A Feasibility Study. Forests, 13 (2). p. 334. ISSN 1999-4907

Shirmohammadi, M. (2023) Study of mass transfer and hygroscopic properties of Australian mass-timber panels and species in hot and humid conditions- moisture sorption and desorption. Wood Material Science & Engineering, 19 (1). pp. 220-234. ISSN 1748-0272

Shirmohammadi, M. (2023) Study of the hygroscopic properties of three Australian wood species used as solid wood and composite products. European Journal of Wood and Wood Products, 81 (6). pp. 1495-1512. ISSN 1436-736X

Shirmohammadi, M. and Faircloth, A. (2023) Effect of Alternate Drying Techniques on Cross-Laminated Timber after Exposure to Free-Water Wetting. Forests, 14 (5). p. 1007. ISSN 1999-4907

Shirmohammadi, M., Faircloth, A., Paul, C. K.-Y. and Fitzgerald, C. J. (2023) Assessment of Termite Damage in Cross-laminated Timber Sections Using Micro-computed Tomography and Vibration Analysis. BioResources, 18 (3). pp. 4430-4449.

Shirmohammadi, M., Faircloth, A. and Redman, A. (2021) Assessment of sound quality: Australian native hardwood species for guitar fretboard production. European Journal of Wood and Wood Products, 79 (2). pp. 487-497. ISSN 1436-736X

Shirmohammadi, M., Faircloth, A. and Redman, A. (2020) Determining acoustic and mechanical properties of Australian native hardwood species for guitar fretboard production. European Journal of Wood and Wood Products, 78 . pp. 1161-1171. ISSN 1436-736X

Shirmohammadi, M., Leggate, W. and Redman, A. (2021) Effects of moisture ingress and egress on the performance and service life of mass timber products in buildings: a review. Construction and Building Materials, 290 , 123176. ISSN 0950-0618

Underhill, I. D., Gilbert, B. P., Bailleres, H., McGavin, R. L. and Patterson, D. (2014) Structural Veneer Based Composite Products from Hardwood Thinning - Part I: Background and Manufacturing. RILEM Bookseries, 9 . pp. 577-588. ISSN 22110844

Vega, M., Hamilton, M. G., Blackburn, D. P., McGavin, R. L., Baillères, H. and Potts, B. M. (2015) Influence of site, storage and steaming on Eucalyptus nitens log-end splitting. Annals of Forest Science . pp. 1-10. ISSN 1286-4560

Vella, R., Heitzmann, M. T., Redman, A. and Bailleres, H. (2019) Comparison of Test Methods for the Determination of Delamination in Glued Laminated Timber. BioResources, 14 (4). pp. 7920-7934. ISSN 1930-2126

Vella, R., Heitzmann, M. T. and Redman, A. (2019) Improving the Adhesion of High-Density Softwoods with Isocyanate Based Adhesives through Surface Incision. BioResources, 14 (4). p. 12. ISSN 1930-2126

Venn, T. J. and McGavin, R. L. (2021) A decision-support system to assist forest industry planning and investment when data are scarce: the case of hardwood veneering in subtropical eastern Australia. Australian Forestry, 84 (2). pp. 59-72. ISSN 0004-9158

Venn, T. J., Dorries, J. W. and McGavin, R. L. (2021) A mathematical model to support investment in veneer and LVL manufacturing in subtropical eastern Australia. Forest Policy and Economics, 128 . p. 102476. ISSN 1389-9341

Venn, T. J., McGavin, R. L. and Ergashev, A. (2020) Accommodating Log Dimensions and Geometry in Log Procurement Decisions for Spindleless Rotary Veneer Production. BioResources, 15 (2). pp. 2385-2411. ISSN 1930-2126

Book Section

Fehrmann, J., McGavin, R. L. and Leggate, W. (2017) Veneer grading and upgrading. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Fehrmann, J., McGavin, R. L. and Leggate, W. (2017) Veneer quality control. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Fitzgerald, C. J., Redman, A., Hopewell, G., McGavin, R. L. and Leggate, W. (2017) Log specifications, grading and pre-processing. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Hopewell, G., Leggate, W. and McGavin, R. L. (2017) Rotary-peeled products: advantages and uses. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Leggate, W. (2017) Protecting veneers and veneer-based products. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Leggate, W. and McGavin, R. L. (2017) Manufacturing rotary veneer and veneer products from small logs: an overview. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

McGavin, R. L. (2017) Rotary peeling. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

McGavin, R. L. (2017) Veneer clipping and drying. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

McGavin, R. L., Vella, R. and Leggate, W. (2017) Product manufacture. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Vella, R., Fehrmann, J., McGavin, R. L. and Leggate, W. (2017) Product grading and quality. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Monograph

Bailleres, H., Lee, D. J., Kumar, C., Psaltis, S., Hopewell, G. and Brancheriau, L. (2019) Improving returns from southern pine plantations through innovative resource characterisation. Project Report. Forest & Wood Products Australia.

Dakin, T. and Leggate, W. (2019) Development of durable engineered wood products in Papua New Guinea and Australia. Project Report. ACIAR.

Leggate, W. (2018) Improving the durability performance of engineered wood products: A study tour of Europe and North America. Project Report. Gottstein Trust Fellowship Report.

Leggate, W., McGavin, R. L. and Bailleres, H. (2017) A guide to manufacturing rotary veneer and products from small logs. Project Report. ACIAR.

Lewis, T., Menzies, T., Brawner, J. T., Venn, T., Francis, B., Ryan, S., Schulke, B., Cameron, N. and Kelly, A. (2020) Improving productivity of the private native forest resource in southern Queensland and northern New South Wales. Project Report. Forest & Wood Products Australia.

McGavin, R. L., Bailleres, H., Lane, F. and Fehrmann, J. (2013) High value timber composite panels from hardwood plantation thinnings. Project Report. Department of Agriculture and Fisheries, Queensland.

McGavin, R. L., Leggate, W., Bailleres, H., Hopewell, G. and Fitzgerald, C. J. (2019) A guide to the rotary veneer processing of coconut palms. Project Report. Australian Centre for International Agricultural Research.

McGavin, R. L., Leggate, W. and Dorries, J. W. (2020) Increasing the Value of Forest Resources through the Development of Advanced Engineered Wood Products. Project Report. Forest & Wood Products Australia.

Nolan, G., McGavin, R. L., Blackburn, D. and Bulai, S. (2019) Development of advanced veneer and other products from coconut wood to enhance livelihoods in South Pacific communities. Project Report. Australian Centre for International Agricultural Research.

Norton, J.H. (2012) Improving the durability of low durability plantation hardwoods for use as power poles. Project Report. Forest & Wood Products Australia.

Smith, H., Faircloth, A., Phengthajaim, V., Souphaxy, K., Tiemaliya, S. and Boupha, L. (2022) Research Note Rubberwood Value Chains in Laos: early observations from an emerging opportunity. Technical Report. ACIAR.

Smith, H., Leggate, W., Faircloth, A. and et al., (2023) Advancing enhanced wood manufacturing industries in Laos and Australia. Technical Report. ACIAR.

Sub-Department of Forestry, Queensland, (1933) The Veneer And Plywood Industry Of Queensland. Technical Report. State of Queensland.

Venn, T., McGavin, R. L. and Leggate, W. (2004) Portable Sawmilling Costs for Landholders in Western Queensland. Working Paper. University of Queensland.

Conference or Workshop Item

Darzi, S., Karampour, H., Bailleres, H., Gilbert, B. P., McGavin, R. L. and Zadeh, S. (2021) Behaviour of composite timber sandwich panels subjected to bending and shear. In: World Conference on Timber Engineering 2021, WCTE 2021, 9-12 August 2021, Santiago, Chile.

Darzi, S., Karampour, H., Gilbert, B. P. and Bailleres, H. (2018) Flexural behaviour of a novel bamboo-plywood sandwich composite panel. In: World Conference on Timber Engineering, Seoul, Republic of Korea.

Gilbert, B. P., Bailleres, H., Zhang, H. and McGavin, R. L. (2016) Mechanical properties of rotary veneers recovered from early to mid-rotation plantation Eucalyptus logs. In: 2016 World Conference on Timber Engineering, WCTE 2016, 22-25 August 2016, Vienna, Austria.

Karampour, H., Bismire, A., Gilbert, B. P. and Bailleres, H. (2018) Experimental investigation on the structural performance of timber-filled tubular steel stub. In: World Conference on Timber Engineering, 20-23 August 2018, Seoul, Republic of South Korea.

Karampour, H., Piran, F., Faircloth, A., Kumar, C., Zhang, D., Gilbert, B. P., Guan, H., Hu, L., Chui, Y. H. and Chang, W. (2023) Design of long-span lightweight timber floors subject to walking excitations: a case study. In: 13th World Conference on Timber Engineering, WCTE 2023, 19 June - 22 June 2023, Oslo, Norway.

Lu, H. R., El Hanandeh, A., Gilbert, B. P. and Bailleres, H. (2017) A comparative life cycle assessment (LCA) of alternative material for Australian building construction. In: 1st International Conference on Advances in Sustainable Construction Materials and Civil Engineering Systems, ASCMCES 2017, University of SharjahSharjah; United Arab Emirates.

Mankowski, M., Kirker, G. and Hassan, B. (2024) Potential of heartwood extracts as wood preservatives combined with linseed oil in 8-year above-ground and in-ground field trials. In: IRG55 Scientific Conference on Wood Protection, 19 - 23 May, 2024, Knoxville, Tennessee, USA.

Nguyen, H., Gilbert, B. P., McGavin, R. L. and Bailleres, H. (2018) Optimisation of cross-banded laminated veneer lumbers manufactured from spotted gum and southern pine veneers. In: 2018 World Conference on Timber Engineering, WCTE 2018, 19-23 August 2018, Seoul, South Korea.

Nguyen, T. T., Heitzmann, M. T., Vandi, L., Bailleres, H. and Redman, A. (2019) The influences of particle sizes on performance of biodegradable wood plastic composites manufactured from lingo-cellulosic agricultural waste. In: 22nd International Conference on Composites Materials (ICCM22), August 11-16 2019, Melbourne, Australia.

Norton, J., Francis, L. P. and Morrell, J. J. (2023) Through-boring to improve the performance of low durability Eucalyptus species for utility poles: 10-year field test results of pole stubs exposed in Southeast Queensland. In: International Research Group on Wood Protection (IRG-WP), 28 May - 1st June 2023, Cairns, Australia.

Robinson, R. J. and Meldrum, S. (2023) Identifying compatible waterborne timber preservatives and fire retardants for use in a VPI system: a practical approach. In: International Research Group on Wood Protection (IRG-WP), 28 May - 1st June 2023, Cairns, Australia.

Shirmohammadi, M. (2023) Investigating the effects of moisture ingress on the performance and service life of Australian mass timber panels-characterization outcomes. In: 13th World Conference on Timber Engineering, WCTE 2023, 19 June - 22 June 2023, Oslo, Norway.

Shirmohammadi, M., Karbaschi, M.R., Hassan, B. and Leggate, W. (2023) Investigating wood anatomical factors influencing the treatability of refractory southern pine - an imaging approach. In: International Research Group on Wood Protection (IRG-WP), 28 May - 1st June 2023, Cairns, Australia.

Strang, M., Leardini, P. and Shirmohammadi, M. (2023) Validating moisture-safe energy efficient CLT assemblies in hot and humid climates using experimental testing. In: World Conference on Timber Engineering (WCTE2023), 19-22 June 2023, Oslo, Norway.

Wood, K., Morrell, J. and Leggate, W. (2020) Enhancing the durability of low durability Eucalyptus plantation species: a review of strategies. In: International Research Group On Wood Protection, 10-11 June 2020.

Yi, T., Norton, J., Meldrum, S. and Morrell, J.J. (2023) Sensitivity of copper indicators for detecting preservative penetration. In: International Research Group on Wood Protection (IRG-WP), 28 May - 1st June 2023, Cairns, Australia.

Zaben, A., Bailleres, H., Vella, R., McGavin, R. L., Fernando, D., Lange, D. and Maluk, C. (2021) Residual performance of a prototype hybrid Timber-FRP glulam beam after fire. In: World Conference on Timber Engineering 2021, WCTE 2021 9 -12 August 2021, 9 -12 August 2021, Santiago, Chile.

Zbonak, A., Bailleres, H., McGavin, R. L. and Harding, K. (2012) Processing small diameter logs from sub-tropical species. In: Australian Forest Growers Conference, October 2012, Gympie.

Book

Shirmohammadi, M. and Leggate, W. (2021) Review of Existing Methods for Evaluating Adhesive Bonds in Timber Products. IntechOpen, 30 pages. ISBN 1839627727

Thesis

Redman, A. (2017) Modelling of vacuum drying of Australian hardwood species. PhD thesis, Queensland University of Technology, 235 pages.