Items where Subject is "Tools and implements"

2024

Dorries, J. W., Venn, T. J., McGavin, R. L. and Tawake, S. (2024) A Decision–Support Tool to Inform Coconut Log Procurement and Veneer Manufacturing Location Decisions in Fiji. Forests, 15 (8). p. 1442. ISSN 1999-4907

Faircloth, A., Gilbert, B. P., Kumar, C., Leggate, W. and McGavin, R. L. (2024) Understanding the adhesion performance of glued laminated timber manufactured with Australian softwood and high-density hardwood species. European Journal of Wood and Wood Products . ISSN 1436-736X

Gattas, J. M., Reid, C., Dakin, T., Shanks, J. and McGavin, R. L. (2024) Board assignment heuristics for nail laminated out-of-grade timber. Australian Journal of Civil Engineering . pp. 1-14. ISSN 1448-8353

Gendvilas, V., Lee, D. J., Kain, D. P., Kumar, C., Downes, G. M., Lausberg, M. and Harrington, J. J. (2024) Predicting Wood Density Using Resistance Drilling: The Effect of Instrument and Operator. Forests, 15 (1). p. 157. ISSN 1999-4907

Grant, P., Psaltis, S., Shirmohammadi, M. and Turner, I. (2024) Image-based mesh generation for constructing a virtual representation of engineered wood product samples. European Journal of Wood and Wood Products . ISSN 1436-736X

Kirker, G. T., Hassan, B., Mankowski, M. E. and Eller, F. J. (2024) Critical Review on the Use of Extractives of Naturally Durable Woods as Natural Wood Protectants. Insects, 15 (1). p. 69. ISSN 2075-4450

2023

Faircloth, A., Brancheriau, L., Karampour, H. and Kumar, C. (2023) Evaluation of full-sized and thick cross-laminated timber using in-line non-destructive techniques. Wood Material Science & Engineering . pp. 1-14. ISSN 1748-0272

2022

Kumar, C. and Leggate, W. (2022) An overview of bio-adhesives for engineered wood products. International Journal of Adhesion and Adhesives, 118 . p. 103187. ISSN 0143-7496

Kumar, C., Li, X., Subhani, M., Shanks, J., Dakin, T., McGavin, R. L. and Ashraf, M. (2022) A review of factors influencing rolling shear in CLT and test methodology. Journal of Testing and Evaluation, 50 (2).

Leggate, W., Outhwaite, A., McGavin, R. L., Gilbert, B. P. and Gunalan, S. (2022) The Effects of the Addition of Surfactants and the Machining Method on the Adhesive Bond Quality of Spotted Gum Glue-laminated Beams. BioResources, 17 (2). pp. 3413-3434. ISSN 1930-2126

2021

Jiao, S., Gunalan, S., Gilbert, B. P., Baleshan, B. and Bailleres, H. (2021) Experimental Investigation of an Innovative Composite Mullion Made of Aluminium and Timber. Journal of Building Engineering, 38 . p. 101907. ISSN 2352-7102

Kumar, C., Redman, A., Leggate, W., McGavin, R. L. and Dakin, T. (2021) Assessment of the Application of a SMART THUMPER™ as a Low-cost and Portable Device Used for Stiffness Estimation of Timber Products. BioResources, 16 (3). ISSN 1930-2126

Leggate, W., McGavin, R. L., Outhwaite, A., Dorries, J. W., Robinson, R. J., Kumar, C., Faircloth, A. and Knackstedt, M. (2021) The Influence of Mechanical Surface Preparation Method, Adhesive Type, and Curing Temperature on the Bonding of Darwin Stringybark. BioResources, 16 (1). p. 22. ISSN 1930-2126

Leggate, W., McGavin, R. L., Outhwaite, A., Kumar, C., Faircloth, A. and Knackstedt, M. (2021) Influence of Mechanical Surface Preparation Methods on the Bonding of Southern Pine and Spotted Gum: Tensile Shear Strength of Lap Joints. BioResources, 16 (1). p. 16. ISSN 1930-2126

Leggate, W., Shirmohammadi, M., McGavin, R. L., Outhwaite, A., Knackstedt, M. and Brookhouse, M. (2021) Examination of wood adhesive bonds via MicroCT: The influence of pre-gluing surface machining treatments for southern pine, spotted gum, and Darwin stringybark timbers. BioResources, 16 (3). pp. 5058-5082. ISSN 1930-2126

Nguyen, T. T., Redman, A., Leggate, W., Vandi, L.-j., Bailleres, H. and Heitzmann, M. (2021) Processing Parameters Optimization of Cotton Stalk (Gossypium hirsutum L.) Particleboards with Emulsifiable Polymeric Isocyanate Adhesive. BioResources, 16 (2). ISSN 1930-2126

Shirmohammadi, M., Faircloth, A. and Redman, A. (2021) Assessment of sound quality: Australian native hardwood species for guitar fretboard production. European Journal of Wood and Wood Products, 79 (2). pp. 487-497. ISSN 1436-736X

2020

Leggate, W., Kumar, C., McGavin, R. L., Faircloth, A. and Knackstedt, M. (2020) The Effects of Drying Method on the Wood Permeability, Wettability, Treatability, and Gluability of Southern Pine from Australia. Bioresources, 16 . pp. 698-720.

Leggate, W., McGavin, R. L., Miao, C., Outhwaite, A., Chandra, K. A., Dorries, J. W., Kumar, C. and Knackstedt, M. (2020) The Influence of Mechanical Surface Preparation Methods on Southern Pine and Spotted Gum Wood Properties: Wettability and Permeability. BioResources, 15 (4). pp. 8554-8576. ISSN 1930-2126

Leggate, W., Shirmohammadi, M., McGavin, R. L., Chandra, K. A., Knackstedt, M., Knuefing, L. and Turner, M. (2020) Influence of Wood’s Anatomical and Resin Traits on the Radial Permeability of the Hybrid Pine (Pinus elliottii× Pinus caribaea) Wood in Australia. BioResources, 15 (3). pp. 6851-6873. ISSN 1930-2126

Lewis, T., Menzies, T., Brawner, J. T., Venn, T., Francis, B., Ryan, S., Schulke, B., Cameron, N. and Kelly, A. (2020) Improving productivity of the private native forest resource in southern Queensland and northern New South Wales. Project Report. Forest & Wood Products Australia.

McGavin, R. L., Leggate, W. and Dorries, J. W. (2020) Increasing the Value of Forest Resources through the Development of Advanced Engineered Wood Products. Project Report. Forest & Wood Products Australia.

Nguyen, T. T., Bailleres, H., Redman, A., Leggate, W., Vandi, L.-j. and Heitzmann, M. (2020) Homogenous Particleboard Made from Whole Cotton (Gossypium hirsutum L.) Stalk Agricultural Waste: Optimisation of Particle Size and Influence of Cotton Residue on Performance. BioResources, 15 (4). pp. 7730-7748. ISSN 1930-2126

Venn, T. J., McGavin, R. L. and Ergashev, A. (2020) Accommodating Log Dimensions and Geometry in Log Procurement Decisions for Spindleless Rotary Veneer Production. BioResources, 15 (2). pp. 2385-2411. ISSN 1930-2126

2019

Bailleres, H., Lee, D. J., Kumar, C., Psaltis, S., Hopewell, G. and Brancheriau, L. (2019) Improving returns from southern pine plantations through innovative resource characterisation. Project Report. Forest & Wood Products Australia.

Dakin, T. and Leggate, W. (2019) Development of durable engineered wood products in Papua New Guinea and Australia. Project Report. ACIAR.

Leggate, W., McGavin, R. L. and Lewis, T. (2019) An Assessment of Native Forests in Queensland for the Potential Supply of Small-diameter, Peeler Logs for Spindleless Lathe Rotary-veneer Processing. BioResources, 14 (4). p. 15. ISSN 1930-2126

Leggate, W., Redman, A., Wood, J., Bailleres, H. and Lee, D. J. (2019) Radial Permeability of the Hybrid Pine (Pinus elliottii× Pinus caribaea) in Australia. BioResources, 14 (2). pp. 4358-4372. ISSN 1930-2126

Mainey, A., Gilbert, B. P., Bailleres, H., Gunalan, S. and Smith, M. (2019) Solutions to reduce moisture driven backout and improve withdrawal strength of nailplates: experimental investigations. European Journal of Wood and Wood Products, 77 (2). pp. 257-269. ISSN 0018-3768

McGavin, R. L. and Leggate, W. (2019) Comparison of Processing Methods for Small-diameter Logs: Sawing versus Rotary Peeling. BioResources, 14 (1). pp. 1545-1536. ISSN 1930-2126

McGavin, R. L., Leggate, W., Bailleres, H., Hopewell, G. and Fitzgerald, C. J. (2019) A guide to the rotary veneer processing of coconut palms. Project Report. Australian Centre for International Agricultural Research.

McGavin, R. L., Nguyen, H. H., Gilbert, B. P., Dakin, T. and Faircloth, A. (2019) A Comparative Study on the Mechanical Properties of Laminated Veneer Lumber (LVL) Produced from Blending Various Wood Veneers. BioResources, 14 (4). pp. 9064-9081. ISSN 1930-2126

Miao, C., Fernando, D., Heitzmann, M. T. and Bailleres, H. (2019) GFRP-To-Timber Bonded Joints: Adhesive Selection. International Journal of Adhesion and Adhesives, 94 . pp. 29-39. ISSN 0143-7496

Nguyen, H. H., McGavin, R. L., Gilbert, B. P. and Bailleres, H. (2019) Key Mechanical Properties of Cross-banded Laminated Veneer Lumbers Manufactured from Blending Spotted Gum and Hoop Pine Veneers. BioResources, 14 (4). p. 15. ISSN 1930-2126

Nolan, G., McGavin, R. L., Blackburn, D. and Bulai, S. (2019) Development of advanced veneer and other products from coconut wood to enhance livelihoods in South Pacific communities. Project Report. Australian Centre for International Agricultural Research.

2018

State Of Queensland Through Its Department Of Agriculture And Fisheries (2018) Drill corer. D/551,835.

Darzi, S., Karampour, H., Gilbert, B. P. and Bailleres, H. (2018) Numerical study on the flexural capacity of ultra-light composite timber sandwich panels. Composites Part B: Engineering, 155 . pp. 212-224. ISSN 13598368

Hien Mai, T. and Redman, A. (2018) Characterisation of acacia and eucalyptus plantation wood for veneer production in vietnam. Journal of Forestry Science and Technology, 5 . pp. 127-135.

Nguyen, H., Gilbert, B. P., McGavin, R. L. and Bailleres, H. (2018) Optimisation of cross-banded laminated veneer lumbers manufactured from spotted gum and southern pine veneers. In: 2018 World Conference on Timber Engineering, WCTE 2018, 19-23 August 2018, Seoul, South Korea.

2017

Gilbert, B. P., Underhill, I. D., Fernando, D. and Bailleres, H. (2017) Structural solutions to produce long timber Veneer Based Composite hollow sections. Construction and Building Materials, 139 . pp. 81-92. ISSN 0950-0618

Leggate, W., McGavin, R. L. and Bailleres, H. (2017) A guide to manufacturing rotary veneer and products from small logs. Project Report. ACIAR.

Redman, A. (2017) Modelling of vacuum drying of Australian hardwood species. PhD thesis, Queensland University of Technology, 235 pages.

Redman, A., Bailleres, H., Perré, P., Carr, E. and Turner, I. (2017) A relevant and robust vacuum-drying model applied to hardwoods. Wood Science and Technology, 51 (4). pp. 701-719. ISSN 1432-5225

2016

Gilbert, B. P., Bailleres, H., Zhang, H. and McGavin, R. L. (2016) Mechanical properties of rotary veneers recovered from early to mid-rotation plantation Eucalyptus logs. In: 2016 World Conference on Timber Engineering, WCTE 2016, 22-25 August 2016, Vienna, Austria.

2015

Hamilton, M. G., Blackburn, D. P., McGavin, R. L., Baillères, H., Vega, M. and Potts, B. M. (2015) Factors affecting log traits and green rotary-peeled veneer recovery from temperate eucalypt plantations. Annals of Forest Science, 72 (3). pp. 357-365.

Hopewell, G. (2015) The Queensland Government Xylaria : History and use. In: Presentation for Royal Society of Queensland, 10 July 2015, Salisbury.

2014

McGavin, R. L., Bailleres, H., Lane, F., Blackburn, D., Vega, M. and Ozarska, B. (2014) Veneer Recovery Analysis of Plantation Eucalypt Species Using Spindleless Lathe Technology. Bioresources .

2012

Norton, J.H. (2012) Improving the durability of low durability plantation hardwoods for use as power poles. Project Report. Forest & Wood Products Australia.

2007

Preda, M., Bubb, K.A. and Cox, M.E. (2007) GIS-based tools for management of pine plantations, Queensland, Australia. Australian Forestry, 70 (1). pp. 61-69.

2005

Bacles, C. F.E., Lowe, A. J., Schenk, P. M., Lee, D. and Kremer, A. (2005) An introduction to ADaPtE: a European union-funded project comparing the structure and dynamics of neutral and adaptive genes in Queensland's spotted gums. In: Corymbia research meeting: Underpinning development of a profitable hardwood plantation industry in northern Australia by research into Corymbia species and hybrids. Department of Primary Industries and Fisheries, 38 pages.

Hemmens, T.J. and Ramsden, M. (2005) Enhancement of GIS through the integration of forest health surveillance and plantation registrar data. International Forestry Review, 7 (5). p. 184. ISSN 1465-5489

Ramsden, M., Hemmens, T.J. and Kennedy, J.F. (2005) Laser technology enhances aerial assessment of plantation health. International Forestry Review, 7 (5). pp. 168-169. ISSN 1465-5489

Williams, R. J., Zerihun, A., Montagu, K. D., Hoffman, M., Hutley, L. B. and Chen, X. (2005) Allometry for estimating aboveground tree biomass in tropical and subtropical eucalypt woodlands: Towards general predictive equations. Australian Journal of Botany, 53 (7). pp. 607-619. ISSN 0067-1924

1995

Constantini, A. (1995) Soil sampling bulk-density in the coastal lowlands of South-East Queensland. Australian Journal of Soil Research, 33 (1). pp. 11-18. ISSN 0004-9573

1933

Sub-Department of Forestry, Queensland, (1933) The Veneer And Plywood Industry Of Queensland. Technical Report. State of Queensland.