Items where Author is "Kumar, Chandan"

Article

Kumar, C., Li, X., Subhani, M., Shanks, J., Dakin, T., McGavin, R. L. and Ashraf, M. (2022) A review of factors influencing rolling shear in CLT and test methodology. Journal of Testing and Evaluation, 50 (2).

Kumar, C. and Leggate, W. (2022) An overview of bio-adhesives for engineered wood products. International Journal of Adhesion and Adhesives, 118 . p. 103187. ISSN 0143-7496

Psaltis, S., Kumar, C., Turner, I., Carr, E. J., Farrell, T., Brancheriau, L., Bailléres, H. and Lee, D. J. (2021) A new approach for predicting board MOE from increment cores. Annals of Forest Science, 78 (3). p. 78. ISSN 1297-966X

Kumar, C., Psaltis, S., Bailleres, H., Turner, I., Brancheriau, L., Hopewell, G., Carr, E. J., Farrell, T. and Lee, D. J. (2021) Accurate estimation of log MOE from non-destructive standing tree measurements. Annals of Forest Science, 78 (1). p. 8. ISSN 1297-966X

Kumar, C., Redman, A., Leggate, W., McGavin, R. L. and Dakin, T. (2021) Assessment of the Application of a SMART THUMPER™ as a Low-cost and Portable Device Used for Stiffness Estimation of Timber Products. BioResources, 16 (3). ISSN 1930-2126

Faircloth, A., Brancheriau, L., Karampour, H., So, S., Bailleres, H. and Kumar, C. (2021) Experimental Modal Analysis of Appropriate Boundary Conditions for the Evaluation of Cross-Laminated Timber Panels for an In-Line Approach. Forest Products Journal, 71 (2). pp. 161-170. ISSN 0015-7473

Kumar, C., Faircloth, A., Leggate, W. and Redman, A. (2021) Impact of Continuous Drying Method on Drying Quality of Southern Pine Sawn Timber. BioResources, 17 (1). p. 18. ISSN 1930-2126

Leggate, W., McGavin, R. L., Outhwaite, A., Kumar, C., Faircloth, A. and Knackstedt, M. (2021) Influence of Mechanical Surface Preparation Methods on the Bonding of Southern Pine and Spotted Gum: Tensile Shear Strength of Lap Joints. BioResources, 16 (1). p. 16. ISSN 1930-2126

Kumar, C. (2021) Investigation of an innovative preservative treatment of green timber using compression. Wood Material Science & Engineering . pp. 1-8. ISSN 1748-0272

McGavin, R. L., McGrath, J., Fitzgerald, C. J., Kumar, C., Oliver, C. and Lindsay, A. (2021) Sawn Timber and Rotary Veneer Processing and Grade Recovery Investigation of Northern Australian Plantation Grown African Mahogany. BioResources, 16 (1). p. 23. ISSN 1930-2126

Leggate, W., McGavin, R. L., Outhwaite, A., Dorries, J. W., Robinson, R., Kumar, C., Faircloth, A. and Knackstedt, M. (2021) The Influence of Mechanical Surface Preparation Method, Adhesive Type, and Curing Temperature on the Bonding of Darwin Stringybark. BioResources, 16 (1). p. 22. ISSN 1930-2126

Leggate, W., Kumar, C., McGavin, R. L., Faircloth, A. and Knackstedt, M. (2020) The Effects of Drying Method on the Wood Permeability, Wettability, Treatability, and Gluability of Southern Pine from Australia. Bioresources, 16 . pp. 698-720.

Leggate, W., McGavin, R. L., Miao, C., Outhwaite, A., Chandra, K. A., Dorries, J. W., Kumar, C. and Knackstedt, M. (2020) The Influence of Mechanical Surface Preparation Methods on Southern Pine and Spotted Gum Wood Properties: Wettability and Permeability. BioResources, 15 (4). pp. 8554-8576. ISSN 1930-2126

Kumar, C., Joardder, M. U. H., Farrell, T. W., Millar, G. J. and Karim, A. (2018) A porous media transport model for apple drying. Biosystems Engineering, 176 . pp. 12-25. ISSN 15375110 (ISSN)

Onwude, D. I., Hashim, N., Abdan, K., Janius, R., Chen, G. and Kumar, C. (2018) Modelling of coupled heat and mass transfer for combined infrared and hot-air drying of sweet potato. Journal of Food Engineering, 228 . pp. 12-24. ISSN 0260-8774

Monograph

Bailleres, H., Lee, D. J., Kumar, C., Psaltis, S., Hopewell, G. and Brancheriau, L. (2019) Improving returns from southern pine plantations through innovative resource characterisation. Project Report. Forest & Wood Products Australia.