Items where Author is "Faircloth, Adam"
Group by: Item Type | Date Number of items: 16. ArticleShirmohammadi, M., Faircloth, A., Paul, C. K.-Y. and Fitzgerald, C. J. (2023) Assessment of Termite Damage in Cross-laminated Timber Sections Using Micro-computed Tomography and Vibration Analysis. BioResources, 18 (3). pp. 4430-4449. Shirmohammadi, M. and Faircloth, A. (2023) Effect of Alternate Drying Techniques on Cross-Laminated Timber after Exposure to Free-Water Wetting. Forests, 14 (5). p. 1007. ISSN 1999-4907 Kumar, C., Faircloth, A., Shanks, J., McGavin, R. L., Li, X., Ashraf, M. and Subhani, M. (2023) Investigating Factors Influencing Rolling Shear Performance of Australian CLT Feedstock. Forests, 14 (4). p. 711. ISSN 1999-4907 Faircloth, A., Kumar, C., McGavin, R. L., Gilbert, B. P. and Leggate, W. (2023) Mechanical Performance and Bond Integrity of Finger Jointed High-Density Sub-Tropical Hardwoods for Residential Decking. Forests, 14 (5). p. 956. ISSN 1999-4907 Karampour, H., Piran, F., Faircloth, A., Talebian, N. and Miller, D. (2023) Vibration of Timber and Hybrid Floors: A Review of Methods of Measurement, Analysis, and Design. Buildings, 13 (7). p. 1756. ISSN 2075-5309 Shirmohammadi, M., Faircloth, A. and Redman, A. (2021) Assessment of sound quality: Australian native hardwood species for guitar fretboard production. European Journal of Wood and Wood Products, 79 (2). pp. 487-497. ISSN 1436-736X Faircloth, A., Brancheriau, L., Karampour, H., So, S., Bailleres, H. and Kumar, C. (2021) Experimental Modal Analysis of Appropriate Boundary Conditions for the Evaluation of Cross-Laminated Timber Panels for an In-Line Approach. Forest Products Journal, 71 (2). pp. 161-170. ISSN 0015-7473 Kumar, C., Faircloth, A., Leggate, W. and Redman, A. (2021) Impact of Continuous Drying Method on Drying Quality of Southern Pine Sawn Timber. BioResources, 17 (1). p. 18. ISSN 1930-2126 Leggate, W., McGavin, R. L., Outhwaite, A., Kumar, C., Faircloth, A. and Knackstedt, M. (2021) Influence of Mechanical Surface Preparation Methods on the Bonding of Southern Pine and Spotted Gum: Tensile Shear Strength of Lap Joints. BioResources, 16 (1). p. 16. ISSN 1930-2126 Leggate, W., McGavin, R. L., Outhwaite, A., Dorries, J. W., Robinson, R., Kumar, C., Faircloth, A. and Knackstedt, M. (2021) The Influence of Mechanical Surface Preparation Method, Adhesive Type, and Curing Temperature on the Bonding of Darwin Stringybark. BioResources, 16 (1). p. 22. ISSN 1930-2126 Shirmohammadi, M., Faircloth, A. and Redman, A. (2020) Determining acoustic and mechanical properties of Australian native hardwood species for guitar fretboard production. European Journal of Wood and Wood Products, 78 . pp. 1161-1171. ISSN 1436-736X Leggate, W., Kumar, C., McGavin, R. L., Faircloth, A. and Knackstedt, M. (2020) The Effects of Drying Method on the Wood Permeability, Wettability, Treatability, and Gluability of Southern Pine from Australia. Bioresources, 16 . pp. 698-720. McGavin, R. L., Nguyen, H. H., Gilbert, B. P., Dakin, T. and Faircloth, A. (2019) A Comparative Study on the Mechanical Properties of Laminated Veneer Lumber (LVL) Produced from Blending Various Wood Veneers. BioResources, 14 (4). pp. 9064-9081. ISSN 1930-2126 MonographSmith, H., Leggate, W., Faircloth, A. and et al., (2023) Advancing enhanced wood manufacturing industries in Laos and Australia. Technical Report. ACIAR. Smith, H., Faircloth, A., Phengthajaim, V., Souphaxy, K., Tiemaliya, S. and Boupha, L. (2022) Research Note Rubberwood Value Chains in Laos: early observations from an emerging opportunity. Technical Report. ACIAR. Conference or Workshop ItemKarampour, H., Piran, F., Faircloth, A., Kumar, C., Zhang, D., Gilbert, B. P., Guan, H., Hu, L., Chui, Y. H. and Chang, W. (2023) Design of long-span lightweight timber floors subject to walking excitations: a case study. In: 13th World Conference on Timber Engineering, WCTE 2023, 19 June - 22 June 2023, Oslo, Norway. |